Slotted Connector

The Slotted Connector is a titanium spinal fixation component designed for integration within compatible posterior spinal instrumentation systems according to the manufacturer’s approved indications and surgical technique.

The implant features a compact connector body incorporating a slotted fixation interface at one end and an additional connection / fastening section at the opposite end. This geometry allows the component to act as a mechanical interface between compatible spinal fixation elements within the overall construct.

According to the supplied catalog information, the product is manufactured from:

Material: Titanium

The product family is listed under:

Cat. No.: AMS 518.003.000

The Slotted Connector is available in six configurations:

Universal / Standard / Long / Short / Extra-Long / Extra-Short

This range provides multiple options for component selection according to construct geometry, relative component position, required connector reach, available surgical space, and intraoperative requirements.

Each variant is assigned an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Slotted Connector is a mechanical spinal fixation component used to create a connection between compatible elements within a spinal stabilization construct.

A simplified configuration can be represented as:

Spinal Fixation Component → Slotted Connector → Compatible Rod / Connector / Fixation Element → Spinal Construct

The elongated slot provides a connection interface that may accommodate component positioning within the limits of the system design.

The exact degree of adjustment and compatible component dimensions are not specified in the supplied catalog.

Product Components and Design

1. Titanium Connector Body

The main structural component is manufactured from Titanium, according to the supplied product data.

It forms the mechanical bridge between compatible spinal fixation components.

2. Slotted Connection Interface

One end incorporates an elongated slot-shaped opening, which forms one of the principal fixation / connection interfaces.

The supplied data does not specify:

• Slot length
• Slot width
• Adjustment range
• Compatible bolt or screw size

3. Opposite Connection Body

The opposite end contains a compact mechanical connection section intended to interface with another compatible spinal fixation component.

4. Fastening / Locking Element

A fastening feature is visible within the connector body.

Its exact:

• Thread specification
• Locking mechanism
• Tool interface
• Recommended tightening torque

are not provided in the supplied catalog data.

5. Configuration-Specific Variants

The product family includes:

• Universal
• Standard
• Long
• Short
• Extra-Long
• Extra-Short

allowing selection according to the required construct configuration.

Intended Use

The Slotted Connector is intended for use within compatible spinal fixation systems, according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, where included within the approved indications, may include:

• Posterior spinal stabilization constructs.
• Connecting compatible spinal rods and fixation components.
• Offset or transitional connections within spinal instrumentation.
• Multi-component posterior fixation assemblies.
• Spinal deformity correction constructs.
• Spinal reconstruction procedures.

Selection of the appropriate connector type depends on:

• Spinal construct geometry.
• Distance between fixation components.
• Required connector length.
• Relative component position.
• Compatible rod / connector dimensions.
• Available surgical space.
• Preoperative planning.
• Intraoperative assessment.

The component should be selected and installed by a qualified spine surgeon according to the approved surgical technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Slotted Connection Geometry

The implant features an elongated slot designed as part of the mechanical connection interface.

Six Configuration Options

Available types include:

Universal | Standard | Long | Short | Extra-Long | Extra-Short

providing a broad selection for different construct requirements.

Construct Positioning Flexibility

Multiple connector lengths / types provide options for different component positions and construct layouts.

Compact Mechanical Connector Design

The implant combines a slotted interface and fastening body within a compact spinal connector component.

Compatible System Integration

Designed to integrate with compatible spinal fixation elements according to the system configuration.

Product Traceability

Each configuration has a dedicated Cat. No. and GTIN No. to support:

• Implant identification.
• Product traceability.
• Surgical set preparation.
• Procurement.
• Inventory management.
• Stock control.

Technical Specifications

Type	Cat. No.	GTIN No.
Universal	AMS 518.003.000T	6221361021815
Standard	AMS 518.003.001T	6221361021846
Long	AMS 518.003.002T	6221361021877
Short	AMS 518.003.003T	6221361021907
Extra-Long	AMS 518.003.004T	6221361021938
Extra-Short	AMS 518.003.005T	6221361021969

Technical Overview

Product Name: Slotted Connector
Material: Titanium
Product Type: Spinal Fixation Connector
Product Category: Posterior Spinal Fixation Component
General Cat. No.: AMS 518.003.000
Available Types: Universal / Standard / Long / Short / Extra-Long / Extra-Short
Number of Configurations: 6
Design: Connector with Slotted Fixation Interface
Fixation Concept: Mechanical Connection between compatible spinal fixation components
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each configuration

Product Features

• Slotted Spinal Connector Design.
• Manufactured from Titanium according to the catalog.
• Designed for compatible spinal fixation systems.
• Elongated slotted connection interface.
• Integrated mechanical fastening section.
• Compact connector geometry.
• Available in 6 configurations.
• Types: Universal, Standard, Long, Short, Extra-Long, and Extra-Short.
• Supports different construct geometries and connector positioning requirements.
• Provides multiple options for preoperative component selection.
• Supports intraoperative construct configuration.
• Individual Cat. No. for each type.
• Individual GTIN No. for each variant.
• Supports implant identification, traceability, procurement, and inventory management.