Product Explanation
The Locking Dynamic Hip Plate 135°, B.C. Hole is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the proximal femur / hip region.
A simplified fixation concept can be represented as:
Proximal Femur → Compatible Hip Fixation Component → 135° Dynamic Hip Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Dynamic Hip Plate
with a:
135°
plate-barrel configuration.
According to the supplied product information, the plate incorporates a:
38.0 mm Barrel Size
and is identified with:
B.C. Hole
configuration.
The plate shaft is available with:
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 Holes
providing multiple product configurations within the same family.
Product Components and Design
- Dynamic Hip Plate Body
The implant consists of an elongated metallic fixation plate connected to an angled proximal barrel section.
The product is specifically identified as:
Locking Dynamic Hip Plate
according to the supplied product designation.
The supplied image visually shows a longitudinal shaft containing multiple fixation openings and an angled cylindrical proximal barrel.
The exact plate length, width, thickness, contour, and plate-to-bone relationship should be confirmed from the manufacturer’s technical drawings.
- 135° Plate-Barrel Angle
The product name specifies:
135°
This is an important geometric characteristic of the plate system.
The 135° designation represents the angular relationship associated with the proximal barrel and plate shaft.
The exact reference lines and measurement method used to define the 135° angle should be confirmed from the manufacturer’s dimensional drawing.
- Barrel Section
The proximal plate incorporates a cylindrical barrel.
According to the supplied product information:
Barrel Size: 38.0 mm
This provides a defined barrel-related dimensional specification.
However, the image does not confirm whether 38.0 mm represents:
- Barrel length.
- Effective barrel length.
- Another defined barrel measurement.
Therefore, the safest product-sheet terminology is:
Barrel Size: 38.0 mm
until the manufacturer’s official dimensional drawing confirms the precise definition.
- B.C. Hole Configuration
The supplied data lists:
Alignment: B.C. Hole
However, B.C. Hole appears to describe a fixation-hole configuration rather than an anatomical alignment.
The exact meaning of the abbreviation B.C. is not defined in the supplied image.
Therefore, it should be retained exactly as:
B.C. Hole
without expanding the abbreviation unless confirmed by official manufacturer documentation.
For a technically structured product sheet, it may be more appropriate to record:
Hole Configuration: B.C. Hole
and:
Alignment: Not specified
subject to confirmation from the manufacturer’s master catalog.
- Shaft Section
According to the supplied product data, the plate is available with:
2 Shaft Holes
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
8 Shaft Holes
10 Shaft Holes
12 Shaft Holes
This provides eight listed shaft-hole configurations within the product family.
The exact physical plate length corresponding to each configuration is not provided.
- Multiple Fixation Opening Geometries
The supplied product image visually shows several openings distributed along the longitudinal plate shaft.
Different opening geometries appear to be incorporated into the design.
The exact function of each opening—such as locking fixation, conventional fixation, compression, positioning, or another function—is not specified in the supplied data and should be confirmed from the approved surgical technique.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Dynamic Hip Plate 135°, B.C. Hole is designed for use as part of a compatible orthopedic fixation system involving the proximal femur / hip region, according to the approved indications, surgical technique, and Instructions for Use.
The product designation identifies it as a Dynamic Hip Plate within a compatible femoral fixation system.
Potential applications may involve proximal femoral fixation where this 135° dynamic hip plate configuration is included within the manufacturer’s approved indications.
The exact fracture classifications, anatomical indications, compatible hip fixation components, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Implant selection may depend on factors including:
- Proximal femur anatomy.
- Fracture location and configuration.
- Required plate-barrel angle.
- Required barrel size.
- Required shaft-hole configuration.
- Required plate length.
- Bone dimensions.
- Bone quality.
- Compatible hip fixation component selection.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
135° Dynamic Hip Plate Configuration
The product is specifically identified as:
Locking Dynamic Hip Plate 135°
providing a defined angular plate configuration within a compatible proximal femur fixation system.
Specified 38.0 mm Barrel Size
According to the supplied product information:
Barrel Size: 38.0 mm
providing a defined dimensional specification within this plate configuration.
The exact definition of this measurement should be confirmed from the official technical drawing.
Eight Shaft-Hole Configurations
The product family includes:
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 Shaft Holes
providing a broad range of shaft configurations.
This supports selection among multiple plate variants according to the required fixation construct and surgical plan.
B.C. Hole Configuration
The product is identified with:
B.C. Hole
configuration.
This differentiates the plate from other potential hole designs within the product family.
The exact technical characteristics represented by the term B.C. Hole should be confirmed from the manufacturer’s documentation.
3.5 mm / Dynamic Hip Fixation Family
The supplied product designation does not state a separate shaft screw size in the visible title beyond its Dynamic Hip Plate classification.
Therefore, the exact compatible screw diameters and fixation components should be obtained from the official system documentation rather than assumed from similar plate families.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Product Variants
Based strictly on the supplied information, the product family includes:
- 1 plate angle: 135°
- 1 listed barrel size: 38.0 mm
- 1 B.C. Hole configuration
- 8 shaft-hole options: 2 / 3 / 4 / 5 / 6 / 8 / 10 / 12
- 2 material options: SS316L / Titanium
If every shaft-hole version is available in both materials, this could represent up to 16 basic shaft × material configurations for the supplied 135° / 38.0 mm specification.
The exact number of commercially available variants should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Dynamic Hip Plate 135°, B.C. Hole |
| Product Category | Trauma – Femur |
| Product Type | Locking Dynamic Hip Plate |
| Anatomical Region | Proximal Femur / Hip region |
| Plate Angle | 135° |
| Barrel Size | 38.0 mm |
| Hole Configuration | B.C. Hole |
| Shaft Hole Options | 2, 3, 4, 5, 6, 8, 10, 12 |
| Number of Shaft-Hole Options | 8 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 16, subject to catalog confirmation |
| Alignment | Not clearly specified; supplied as “B.C. Hole” |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Barrel Diameter | Not provided |
| Exact Definition of Barrel Size | Not provided |
| Compatible Hip Fixation Component | Not provided |
| Compatible Screw Details | Not provided |
| B.C. Hole Definition | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Dynamic Hip Plate 135°, B.C. Hole
Product Category: Trauma – Femur
Product Type: Locking Dynamic Hip Plate
Anatomical Region: Proximal Femur / Hip region
Plate Angle: 135°
Barrel Size: 38.0 mm
Hole Configuration: B.C. Hole
Shaft Hole Options: 2, 3, 4, 5, 6, 8, 10, and 12
Material Options: SS316L and Titanium
Plate Geometry: Angled proximal barrel connected to an elongated fixation shaft
Fixation Concept: Plate-based internal fixation using compatible hip fixation components and screws
Alignment: Not specified; B.C. Hole appears to represent hole configuration
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Barrel Diameter: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Exact B.C. Definition: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Dynamic Hip Plate.
- Associated with the Trauma – Femur product family.
- Features a 135° plate-barrel configuration.
- Specified with a 38.0 mm barrel size.
- Identified with a B.C. Hole configuration.
- Available with 2 shaft holes.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 8 shaft holes.
- Available with 10 shaft holes.
- Available with 12 shaft holes.
- Provides eight shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features an angled cylindrical proximal barrel.
- Features an elongated fixation shaft.
- Includes multiple visible fixation openings.
- Supports multiple potential plate-length configurations.
- Exact definition of the 38.0 mm barrel size should be confirmed from the manufacturer’s dimensional drawing.
- Exact compatible hip fixation component should be confirmed from the official system documentation.
- Exact meaning and technical functionality of B.C. Hole should be confirmed from the manufacturer.
- Exact compatible screw types and diameters should be confirmed from the system documentation.
- Exact plate lengths, width, thickness, barrel diameter, and other dimensional parameters should be confirmed from the manufacturer’s technical drawings.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.