Selfix Threaded Rods are structural components used within Orthopedic External Fixation systems. They function as Threaded Connecting Rod Components that integrate with Clamps, Connectors, and other External Fixator components to establish the required Frame Geometry according to the surgical plan and fixation system design.
The product features a straight Rod Body with a Continuous Threaded Surface Geometry extending along its longitudinal section. This provides a Connection Interface that can be used with compatible components for positioning and arrangement along the Rod according to the system-specific Assembly Instructions.
According to the provided product data, the product family is listed under the general reference:
Cat. No.: AMS 607.006
The range is available in five lengths: 40, 60, 80, 100, and 150 mm, providing a progressive range of options during Preoperative Frame Planning and Intraoperative Frame Assembly.
The different available lengths support selection of the appropriate Threaded Rod Configuration according to Distance Between Frame Components, Required Component Spacing, Anatomical Region, Fixator Geometry, and compatibility with the Clamps and Connectors being used.
Each length carries an individual Cat. No. and GTIN Number, supporting Product Identification, Product Traceability, Surgical Set Preparation, Procurement, Inventory Management, and Stock Control.
Product Description
A Threaded Rod is a Structural Connecting Component used within External Skeletal Fixation systems to connect and position components of the Fixator Frame.
Its general role within the Construct can be represented as follows:
Frame Component / Clamp → Threaded Rod → Connector / Clamp → External Fixator Component
The Threaded Surface provides a Mechanical Connection Interface for compatible components according to the fixation system design.
The current product carries the catalog / trade designation:
Selfix Threaded Rods
and is available in the following lengths:
40 | 60 | 80 | 100 | 150 MM
Product Components and Design
- Threaded Rod Body
The main longitudinal body of the product, functioning as a Structural Connecting Element within the External Fixator Construct.
- Continuous Threaded Surface
The product features a Threaded Surface Geometry extending along the Rod Body.
This geometry is used as part of the Mechanical Connection with compatible components according to the fixation system design.
The currently available data do not specify:
- Thread Diameter
- Thread Pitch
- Thread Standard
- Thread Profile
Therefore, these specifications should not be stated without reference to the official Technical Datasheet.
- Proximal Rod End
One end of the Rod used during Assembly and for connection with compatible fixation-system components.
- Distal Rod End
The opposite end, allowing completion of the Connection Arrangement within the External Fixation Construct.
- Length-Specific Configuration
The product family is available in five lengths:
- 40 mm
- 60 mm
- 80 mm
- 100 mm
- 150 mm
providing different options for Frame Dimensions and Component Spacing.
Product Use
Selfix Threaded Rods are used within compatible Orthopedic External Fixation systems as Structural Connection Elements between components of the Fixator Frame.
Depending on the fixation system design and approved indications, they may be incorporated into:
- Modular External Fixation
- Circular External Fixation Constructs
- External Fracture Stabilization Systems
- Bone Segment Stabilization Constructs
- Orthopedic Reconstruction Frames
- Connection and positioning of Clamps and Connecting Elements
- Adjustment of spacing between Frame Components
Selection of the appropriate Rod Length depends on:
- External Fixator Geometry
- Distance Between Components
- Required Component Spacing
- Fixation Site
- Anatomical Region
- Clamp / Connector Compatibility
- Preoperative Frame Planning
- Intraoperative Frame Assembly
The product should only be used with compatible components and in accordance with the applicable IFU and Assembly Instructions of the fixation system.
Key Benefits
Threaded Connection Geometry
The Threaded Shaft provides an extended connection interface for compatible components within the External Fixator Construct.
Multiple Length Options
The product family is available in:
40 / 60 / 80 / 100 / 150 mm
to accommodate different Frame Construction requirements.
Wide Length Range
The Length Range extends from:
40 to 150 mm
providing options from compact to longer Rod Configurations.
Modular Frame Integration
Designed for use with compatible External Fixation components such as:
- Clamps
- Connecting Elements
- Rings
- Arches
- Plates
- Other Frame Components
Frame Assembly Flexibility
The combination of multiple lengths and Threaded Geometry supports:
- Component Positioning
- Frame Layout
- Component Spacing
- Construct Assembly
Product Traceability
Each variant carries an individual Cat. No. and GTIN Number to support:
- Product Identification
- Product Traceability
- Procurement
- Inventory Management
- Stock Control
Technical Specifications
| Length | Cat. No. | GTIN No. |
| 40 mm | AMS 607.006.040 | 6221361014589 |
| 60 mm | AMS 607.006.060 | 6221361014602 |
| 80 mm | AMS 607.006.080 | 6221361014626 |
| 100 mm | AMS 607.006.100 | 6221361014640 |
| 150 mm | AMS 607.006.150 | 6221361014664 |
Technical Overview
Product Name: Selfix Threaded Rods
Product Type: Threaded External Fixation Connecting Rod
Product Category: Orthopedic External Fixation Component
General Cat. No.: AMS 607.006
Available Lengths: 40 / 60 / 80 / 100 / 150 mm
Length Range: 40–150 mm
Number of Configurations: 5
Design: Straight Threaded Rod
Surface Geometry: Continuous Threaded Configuration as shown
Functional Role: Structural Connection & Component Positioning within External Fixator Construct
System Application: Modular / Circular External Fixation
Identification: Individual Cat. No. & GTIN No. for each length
Product Features
- Selfix Threaded Rod Design.
- Intended for compatible Orthopedic External Fixation systems.
- Features a Straight Rod Geometry.
- Incorporates a Threaded Surface extending along the Rod Body.
- Functions as a Structural Connecting Component.
- Available in 5 Length Configurations.
- Available lengths: 40, 60, 80, 100, and 150 mm.
- Length Range from 40 to 150 mm.
- Provides multiple options during Frame Planning.
- Supports Component Positioning and Spacing.
- Provides flexibility during Intraoperative Frame Assembly.
- Can be integrated with compatible Clamps, Connectors, and other system components.
- General Cat. No.: AMS 607.006.
- Individual Cat. No. for each length.
- Individual GTIN Number for each configuration.
- Supports Product Traceability, Procurement, Inventory Management, and Stock Control.
Reviews
There are no reviews yet.